| ASTM A270/A270M-15 - 1.5.2015 | ||||||||||||||||||
| 1. Scope | ||||||||||||||||||
1.1 This specification covers grades of seamless, welded, and heavily cold worked welded austenitic and ferritic/austenitic stainless steel sanitary tubing intended for use in the dairy and food industry and having special surface finishes. Pharmaceutical quality may be requested, as a supplementary requirement. 1.2 This specification covers tubes in sizes up to and including 12 in. [300 mm] in outside diameter. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 Optional supplementary requirements are provided, and when one or more of these are desired, each shall be so stated in the order. | ||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||
|