1.1 This specification covers corrugated steel structural plate, zinc-coated, used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners and accessory materials are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. 1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, manufacture in the plant, and care in the installation. The purchaser must correlate the preceding factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated steel structural plate pipe and the proper installation procedures are described in Practices A796/A796M and A807/A807M. 1.3 This specification is applicable to orders in either inch-pound units (as A761) or SI units (as A761M). Inch-pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text, but they are the applicable values when the material is ordered to A761M. 1.4 This specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this specification. |
A123/A123M-24 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
B695-21 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
B6-23 | Standard Specification for Zinc |
A902-24 | Standard Terminology Relating to Metallic Coated Steel Products |
A807/A807M-19(2025) | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
A796/A796M-21 | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
A780-01 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
A754/A754M-21 | Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence |
A751-25 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
A563M-07 | Standard Specification for Carbon and Alloy Steel Nuts [Metric] |
A563-15 | Standard Specification for Carbon and Alloy Steel Nuts |
A449-14(2020) | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
A370-26 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
A307-21 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
A153/A153M-23 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
A90/A90M-21 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
A36/A36M-19 | Standard Specification for Carbon Structural Steel |
F568M-07 | Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012) |
E376-26 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods |
E29-22 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
|