1.1 This specification covers cold-rolled commercial steel (CS) sheet in coils and cut lengths, in which the maximum of the specified carbon range is over 0.15 and not over 0.25%, and the maximum of the specified manganese range is not over 0.90%. This material is ordered to chemical composition. 1.2 This specification is not applicable to the steels covered in Specifications A 366/A 366M, A 611, A 109, and A 109M. |
A749/A749M-26 | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
A1008/A1008M-26 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
E527-23 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
J1086 | Numbering Metals and Alloys |
A109/A109M-25 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
A568/A568M-25a | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for (Includes all amendments and changes 12/5/2025). |
|