ASTM A861-04(2013) - 1.5.2013
 
1. Scope

1.1 This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain end design.

1.4 Pipe and pipe fittings shall be of the sizes specified in Table 1 and Table 2 and Figs. 1-71 or other sizes that shall be permitted to conform to the requirements given herein.

1.4.1 Pipe:

1.4.1.1 No-hub (MJ) (Fig. 1):

1.4.1.2 Hub/Plain End (Fig.35):

1.4.2 Fitting (No-hub) (MJ):

 
2. Referenced Documents

National Motor Freight Classification

Uniform Classification Rules Available from American Trucking Association, 950 North Glebe Road, Suite 210, Arlington, VA 22203-4181.

E351-25

Standard Test Methods for Chemical Analysis of Cast Iron—All Types

A518/A518M-99(2022)

Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

E350-23

Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron