ASTM A872/A872M-21 - 1.5.2021
 
1. Scope

1.1?This specification covers centrifugally cast ferritic/austenitic steel pipe intended for general corrosive service. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.

1.2?Optional supplementary requirements are provided when additional testing may be required.

1.3?The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of each other. Combining values from the two systems may result in nonconformance with the specification.

1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

 
2. Referenced Documents

E186-20

Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings

Adjunct Reference Radiographs--Transparencies in Ringbinders, 2 Volumes Available from ASTM International Headquarters. Request for Vol I and for Vol II.

Adjunct Reference Radiographs--Transparencies in Ringbinders, 3 Volumes Available from ASTM International Headquarters. Request for Vol I, for Vol II, and for Vol III.

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

A999/A999M-23

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

A781/A781M-21

Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A488/A488M-18e2

Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel (Includes all amendments and changes 2/12/2020).

Section IX

Welding Qualifications Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Two Park Ave., New York, NY 10016-5990, http://www.asme.org.

E446-20

Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

E340-23

Standard Practice for Macroetching Metals and Alloys

E94-04

Standard Guide for Radiographic Examination

E165-09

Standard Practice for Liquid Penetrant Examination for General Industry

Adjunct Reference Radiographs--Transparencies in Ringbinders, 3 Volumes Available from ASTM International Headquarters. Request for Vol I, for Vol II, and for Vol III.

E280-21

Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings