1.1 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) in the form of hot-finished and cold-worked rounds, squares, hexagons, rectangles, and cold-worked wire. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. The following precautionary caveat pertains only to the test methods portion, Section , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
E38-85 | Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989) |
E112-25e1 | Standard Test Methods for Determining Average Grain Size (Includes all amendments and changes 9/9/2026). |
MIL-STD-129 | Marking for Shipment and Storage |
B168-26 | Standard Specification for Nickel-Chromium-Aluminum Alloys, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
B880-24 | Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys |
E8-04 | Standard Test Methods for Tension Testing of Metallic Materials |
E18-25 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
E29-22 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
E140-12B(2019)e1 | Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness (Includes all amendments and changes 5/7/2019). |
E527-23 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
E1473-22 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
Fed. Std. No. 182 | Continuous Identification Marking of Nickel and Nickel-Base Alloys |
|