ASTM B209M-02

ASTM B209M-02 - 10.4.2002

1. Scope

1.1 This specification covers aluminum and aluminum alloy flat sheet, coiled sheet, and plate, in the alloys (Note 1) and tempers shown in, Tables 2 and 3 in the following finishes:

1.1.1 Plate in all alloys and sheet in heat-treatable alloys: mill finish.

1.1.2 Sheet in nonheat-treatable alloys: mill finish, one-side bright mill finish, standard one-side bright finish, and standard two-sides bright finish.

1.2 Alloy and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E 527.

Note 1—Throughout this specification, use of the term alloyin the general sense includes aluminum as well as aluminum alloy.

Note 2—See Specification B 632/B 632M for Tread Plate.

1.3 This specification is the metric counterpart of Specification B 209.

1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

2. Referenced Documents

B928/B928M-15(2023)e1	Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments (Includes all amendments and changes 10/31/2023).
B548-25	Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
B557M-15(2023)	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
B594-19(2025)	Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
B632/B632M-24	Standard Specification for Aluminum-Alloy Rolled Tread Plate
B660-23	Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B666/B666M-20	Standard Practice for Identification Marking of Aluminum and Magnesium Products
E290-22	Standard Test Methods for Bend Testing of Material for Ductility
E1251-25	Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
G47-26	Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ISO209-1	Wrought Aluminum and Aluminum Alloys-Chemical Composition and Forms of Product
ISO2107	Aluminum, Magnesium and their Alloys-Temper Designation
ISO6361-2	Wrought Aluminum and Aluminum Alloys, Sheets, Strips, and Plates
G34-23	Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E607-02	Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
E716-16(2021)e2	Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry (Includes all amendments and changes 9/7/2022).
E1004-23	Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
B209-14	Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B881-25a	Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products (Includes all amendments and changes 1/8/2026).
B947-14(2020)e1	Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate (Includes all amendments and changes 10/5/2020).
B985-24	Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E34-11	Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
B918-01	Standard Practice for Heat Treatment of Wrought Aluminum Alloys