ASTM B236M-07(2015) - 1.10.2015
 
1. Scope

1.1 This specification covers Aluminum 1350 bar for electric conductors in the tempers shown in Table 1.

(A) For purposes of determining conformance with this specification, each value for tensile strength and yield strength shall be rounded to the nearest 1 MPa in accordance with the rounding-off method of Practice E29.
(B) See Appendix X2.

1.2 Aluminum and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System designation is A91350 in accordance with Practice E527.

Note 1: For Alloy 6101 bus conductors, refer to Specification B317/B317M.

Note 2: Prior to 1975, Aluminum 1350 was designated as EC aluminum.

1.3 This specification is the metric counterpart of Specification B236.

1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A1.

 
2. Referenced Documents

B317/B317M-23

Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

B193-25

Standard Test Method for Resistivity of Electrical Conductor Materials

B666/B666M-20

Standard Practice for Identification Marking of Aluminum and Magnesium Products

B557M-15(2023)

Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

B660-23

Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

E34-11

Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

E55-23

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E290-22

Standard Test Methods for Bend Testing of Material for Ductility

E527-23

Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

E607-02

Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere

B881-25a

Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products (Includes all amendments and changes 1/8/2026).

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E716-16(2021)e2

Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry (Includes all amendments and changes 9/7/2022).

E1251-25

Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

E1004-23

Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method

H35.1/H35.1M

Alloy and Temper Designation Systems for Aluminum

MIL-STD-129

Marking for Shipment and Storage Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.

Fed. Std. No. 123

Marking for Shipment (Civil Agencies)