D2272-22 | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
D2273-08 | Standard Test Method for Trace Sediment in Lubricating Oils |
D2422-24 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
D2668-07(2021) | Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption |
D3427-26 | Standard Test Method for Air Release Properties of Hydrocarbon Based Oils |
D4057-22 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
D4898-23 | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
D5185-26 | Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
D6224-23 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
D6304-25 | Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
D6439-23 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
D6810-22 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry |
D6971-22 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
D7155-20(2026) | Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils |
D7647-24 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
D7669-20 | Standard Guide for Practical Lubricant Condition Data Trend Analysis |
D7720-21(2025) | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
ISO 11171 | Hydraulic Fluid Power--Calibration of Automatic Particle Counters for Liquids |
D445-26 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
D664-24 | Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration |
D665-25 | Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water |
D892-25 | Standard Test Method for Foaming Characteristics of Lubricating Oils |
D943-25 | Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
D974-22 | Standard Test Method for Acid and Base Number by Color-Indicator Titration |
D92-24 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
D130-26 | Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test |
D1500-24 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
D1401-21 | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
F311-26 | Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
ISO 11500 | Hydraulic Fluid Power--Determination of the Particulate Contamination Level of a Liquid Sample by Automatic Particle Counting Using the Light Extinction, Second Edition, 2008 |
ISO 4407 | Hydraulic Fluid Power--Fluid Contamination--Determination of Particulate Contamination by Counting Method Using an Optical Microscope, Second Edition, 2002 |
F312-08(2023) | Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
ISO 4406 | Hydraulic fluid power--Fluids--Method for Coding the Level of Contamination by Solid Particles, Second Edition, 1999 |