ASTM D4865-19 - 1.7.2019
 
Significance and Use

4.1 Pumping, filtering, and tank filling of petroleum products, particularly refined distillates, can cause the generation and accumulation of electrostatic charges and can result in static discharges capable of causing fires and explosions. This guide provides an overview of the factors involved in the generation of such electrostatic charges. Methods are described for the alleviation of the problem, and cited authoritative references contain more details.

4.2 This guide is not intended to provide operating or safety rules for the handling of petroleum products to avoid electrostatic hazards.

 
1. Scope

1.1 This guide describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation, and methods for the safe dissipation of such charges. This guide is intended to increase awareness of potential operating problems and hazards resulting from electrostatic charge accumulation.

1.2 This guide is not intended to provide specific solutions but indicates available techniques the user may wish to investigate to alleviate electrostatic charges. This guide does not cover the effects of stray currents or of lightning, either of which can also produce sparks leading to fires or explosions.

1.3 This guide is not intended to address detailed safety practices associated with static electricity in petroleum product systems.

1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

 
2. Referenced Documents

D4306-20

Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D4308-24

Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

D5191-22

Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)

NFPA Standard No. 30

Flammable and Combustible Liquid Code

D6615-25

Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D5452-23

Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

BS 5958 (Part 2)

Recommendations for Particular Industrial Situations Part 2 of British Standard Code of Practice for Control of Undesirable Static Electricity, available from British Standards Institute, 2 Park St., London, England WIA2B5.

CAN/CGSB 3.517

Automotive Low Sulphur Diesel Fuel

CAN/CGSB 3.6

Regular Sulphur Diesel Fuel

D910-26

Standard Specification for Leaded Aviation Gasolines

D975-26c

Standard Specification for Diesel Fuel (Includes all amendments and changes 7/20/2026).

D2276-22

Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D2624-26

Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

NFPA Standard No. 407

Standard on Aircraft Fuel Servicing

D56-22

Standard Test Method for Flash Point by Tag Closed Cup Tester

D93-26

Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D323-26

Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

D396-26a

Standard Specification for Fuel Oils (Includes all amendments and changes 4/14/2026).

D1655-26b

Standard Specification for Aviation Turbine Fuels (Includes all amendments and changes 8/10/2026).

D3699-25

Standard Specification for Kerosine

D3948-22

Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D2880-23

Standard Specification for Gas Turbine Fuel Oils