ASTM D4966-98(2004) - 1.12.2004
 
1. Scope

1.1 This test method covers the determination of the abrasion resistance of textile fabrics using the Martindale abrasion tester. Fabrics of all types may be tested by this method but difficulties may arise with fabrics with a pile depth greater than 0.08 in. (2 mm).

1.2 The values stated in inch-pound units are to be regarded as standard; the values in SI units are provided as information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

For other current test methods of testing the abrasion resistance of textiles refer to Test Methods D 3884, D 3885, D 3886, D 4157, D 4158, and AATCC Test Method 93.

 
2. Referenced Documents

D123-23

Standard Terminology Relating to Textiles

D3886-22

Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)

D4157-13(2022)

Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

D4158-08(2025)

Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)

D3885-07a(2024)

Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) (Includes all amendments and changes 11/14/2024).

Evaluation Procedure 1

Gray Scale for Color Change Available from the American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709.

Abrasion Resistance of Fabrics: Accelerator Method

D3884-22

Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform Abrader Method)

D1776-08

Standard Practice for Conditioning and Testing Textiles

D4850-23

Standard Terminology Relating to Fabrics and Fabric Test Methods