ASTM D5106-99 - 10.6.1999
 
1. Scope

1.1 This specification covers crushed steel slag coarse and fine aggregates suitable for use in high stability, high friction bituminous paving mixtures.

1.2 The steel slag may be used as the entire aggregate, or combined with other mineral aggregates covered in Specifications D692 or D1073, to produce paving mixtures as described in Specifications D3515 or D4215.

1.3 Units of Measurement:

1.3.1 For sieve sizes and the size of aggregate as determined by the use of testing sieves, the values in inch-pound units are shown for the convenience of the user; however, the standard sieve designation shown in parentheses is the standard value as stated in Specification E11.

1.3.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

 
2. Referenced Documents

C117-23

Standard Test Method for Materials Finer than 75-?m (No. 200) Sieve in Mineral Aggregates by Washing

C125-26

Standard Terminology Relating to Concrete and Concrete Aggregates

C131-06

Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

D8-26

Standard Terminology Relating to Materials for Roads and Pavements

D75-03

Standard Practice for Sampling Aggregates

D692-00

Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

D1073-16(2022)

Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

D3319-23

Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel

D3515-01

Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)

D3665-24

Standard Practice for Random Sampling of Construction Materials

D4215-21

Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures

C88-13

Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

E11-24

Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves

D448-12(2022)

Standard Classification for Sizes of Aggregate for Road and Bridge Construction

D4318-17

Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

D4792-00

Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

D4867/D4867M-26

Standard Test Method for Effect of Moisture on Asphalt Mixtures

D5711-03

Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012)

D5821-13(2025)

Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

C142-97

Standard Test Method for Clay Lumps and Friable Particles in Aggregates

C136-06

Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates