ASTM D5139-90(1996) - 1.1.2001
 
1. Scope

1.1 This specification defines the size composition and surface preparation requirements for test samples used to evaluate coatings according to the following ASTM test procedures.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

 
2. Referenced Documents

D4260-23

Standard Practice for Liquid and Gelled Acid Etching of Concrete

D4541-22

Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

D7234-22

Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

C33/C33M-24a

Standard Specification for Concrete Aggregates (Includes all amendments and changes 11/18/2024).

C150/C150M-24

Standard Specification for Portland Cement

C192/C192M-26a

Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory (Includes all amendments and changes 8/13/2026).

A36/A36M-19

Standard Specification for Carbon Structural Steel

D4258-23

Standard Practice for Surface Cleaning Concrete for Coating

D4259-24

Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application

D4538-21

Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

D3912-10(2023)

Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants

C494/C494M-24

Standard Specification for Chemical Admixtures for Concrete

C618-26

Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C260-10

Standard Specification for Air-Entraining Admixtures for Concrete