ASTM D5211-17 - 1.6.2017
 
1. Scope

1.1 This specification covers xylenes for p-xylene feedstock. These xylenes typically are extracted from reformate.

1.2 The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or calculated value shall be rounded off “to the nearest unit” in the last right hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.4 Consult current OSHA regulations, suppliers’ Safety Data Sheets (SDS), and local regulations for all materials used in this specification.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

 
2. Referenced Documents

D7359-23

Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

D7457-12

Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019)

D7504-23

Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

D7536-24

Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D3437-15(2022)

Standard Practice for Sampling and Handling Liquid Cyclic Products

D8005-23

Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

D5194-24a

Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons (Includes all amendments and changes 7/17/2024).

D850-25

Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

D7184-24

Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

D7183-23

Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

D6563-12

Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography (Withdrawn 2018)

D5808-23

Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

D5386-24

Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications