Inspection Bureau Memorandum No. 1

Interpretation of Wood Failure

General Technical Report FPL-GTR-190

Wood Handbook: Wood as an Engineering Material, Madison, WI: U. S. Department of Agriculture, Forest Service, Forest Products Laboratory, 508 p. 2010.

D906-20

Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading

D905-08(2021)

Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

D5751-99(2019)

Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

D5572-95(2019)

Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

D4688-99

Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber

D2559-12a(2024)

Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions (Includes all amendments and changes 9/19/2024).

ANSI/HPVA HP-1-2009

American National Standard for Hardwood and Decorative Plywood Available from Hardwood Plywood & Veneer Association, 1825 Michael Faraday Drive, P.O. Box 2789, Reston, VA 20190, www.hpva.org.

CSA O112.9

Evaluation of Adhesives for Structural Wood Products (Exterior Exposure)

PS 1

U.S. Product Standard for Construction and Industrial Plywood

American Plywood Association Proposed Standard Method for Estimating Percentage Wood Failure on Plywood Shear Specimens Available from APA – The Engineered Wood Association, 7011 South 19th St., Tacoma, WA 98466, www.apawood.org.

ANSI A190.1-2012

American National Standard for Wood Products--Structural Glued, Laminated Timber