ASTM D6000-96e1 - 13.10.1998
 
1. Scope

1.1 this guide covers a series of options, but does not specify a course of action. It should not be used as the sole criterion or basis of comparison, and does not replace or relieve professional judgement.

1.2 This guide summarizes methods for the presentation of water-level data from ground-water sites.

 
2. Referenced Documents

D4104-17

Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

D5254-92(1998)

Standard Practice for Minimum Set of Data Elements to Identify a Ground-Water Site

D4105-15

Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

D4106-20

Standard Practice for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

D4630-19

Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

D4631-18

Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique

D653-26a

Standard Terminology Relating to Soil, Rock, and Contained Fluids (Includes all amendments and changes 6/15/2026).

D4043-17(2026)e1

Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques (Includes all amendments and changes 7/17/2026).

D4044-96

Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers

D4050-20

Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems

D5269-15

Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024)

D5270-96

Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

D5408-93(1998)

Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors

D5409-93(1998)

Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two-Physical Descriptors

D5410-93(1998)

Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors

D5447-17

Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem (Withdrawn 2026)

D5472-93(1999)e1

Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well

D5473-93(2000)

Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

D5474-93(2000)

Standard Guide for Selection of Data Elements for Ground-Water Investigations

D5490-93e1

Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information

D5609-16

Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling (Withdrawn 2025)