ASTM D608-05 - 15.5.2005
 
1. Scope

1.1 This specification covers dibutyl phthalate (99 % grade).

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this stnadard.

1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.

1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

 
2. Referenced Documents

D4052-22

Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D1476-02

Standard Test Method for Heptane Miscibility of Lacquer Solvents

D1613-17(2023)

Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

D1617-22

Standard Test Method for Ester Value of Solvents and Thinners

D1209-25

Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

D268-25

Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

D1364-22

Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

E300-03(2022)

Standard Practice for Sampling Industrial Chemicals

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

D5386-24

Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

D1296-23

Standard Test Method for Odor of Volatile Solvents and Diluents