D618-21

Standard Practice for Conditioning Plastics for Testing

IEC 60695-5-2

Fire Hazard Testing. Part 5: Assessment of Potential Corrosion Damage by Fire Effluent - Section 2: Guidance on the Selection and Use of Test Methods

D5537-23a

Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration (Includes all amendments and changes 5/18/2023).

E176-24a

Standard Terminology of Fire Standards (Includes all amendments and changes 12/9/2024).

E691-23

Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E906-09

Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

E1354-26

Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

D1711-26

Standard Terminology Relating to Electrical Insulation

D5424-23a

Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration (Includes all amendments and changes 5/18/2023).

E2965-25

Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter

C22.2 No. 0.3, FT4, Vertical Flame Tests: Cables in Cable Trays, Section 4.11.4 in C22.2 No. 0.3, Test Methods for Electrical Wires and Cables Available from Canadian Standards Association (CSA), 5060 Spectrum Way, Mississauga, ON L4W 5N6, Canada, http://www.csa.ca.

E1474-22

Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter

E2058-19

Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)

IEEE 1202

Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies, IEEE Standard 1202 Available from Institute of Electrical and Electronics Engineers, Inc. (IEEE), 445 Hoes Ln., P.O. Box 1331, Piscataway, NJ 08854-1331, http://www.ieee.org.

IEC 60695-4

Fire Hazard Testing. Part 4: Terminology Concerning Fire Tests Available from International Electrotechnical Commission (IEC), 3 rue de Varemb, Case postale 131, CH-1211, Geneva 20, Switzerland, http://www.iec.ch.

D5485-26

Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter