ASTM E844-97 - 10.6.1997
 
1. Scope

1.1 This guide covers the selection, design, irradiation, post-irradiation handling, and quality control of neutron dosimeters (sensors), thermal neutron shields, and capsules for reactor surveillance neutron dosimetry.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

E170-23

Standard Terminology Relating to Radiation Measurements and Dosimetry

E1214-11(2023)

Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance

E2006-22

Standard Guide for Benchmark Testing of Light Water Reactor Calculations

E2005-21

Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields

E910-18

Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance

E854-19

Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance

E1018-20e1

Standard Guide for Application of ASTM Evaluated Cross Section Data File (Includes all amendments and changes 7/2/2020).

E1005-21

Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance

E261-16(2021)

Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques