ASTM E867-06(2020) - 1.11.2020
 
1. Scope

1.1 This terminology covers definitions for approved standards under the jurisdiction of ASTM Committee E17 on Vehicle-Pavement Systems. Definitions of terms specific to an individual standard are listed in the appendix. For additional information, see Terminology D8, Terminology F538, Special Report 113, and SAE J 2047, or contact ISO, PIARC, or CEN.

1.2 Other publications may reference this terminology for terms used therein.

1.3 The standard containing the term and the responsible subcommittee of Committee E17 is listed at the end of each definition. Revision of the listed standard by that subcommittee will include review of the definition and approved changes or additions will be incorporated herein.

1.4 The terms in this terminology standard are listed in categories of the five groups of Committee E17. These are definitions that are in multiple standards in various subcommittees in Groups II to V. The structure of E17 is as follows: Group II on Skid Resistance, E17.21, E17.22, E17.23, E17.24, Group III Roughness E17.31, E17.32, Group IV Pavement Management E17.41, and Group V Intelligent Transportation Systems E17.51, E17.52, E17.54.

1.5 This terminology lists the definition as presented in the approved standards. Variation of any term is also listed and referenced to the defined term (for example the term hydroplaning, viscous is also listed and referenced to the defined viscous hydroplaning).

1.6 The term and its elements should appear in the following order; term; abbreviation; symbol; dimensions of quantities, measurement units; part of a speech; delimiting phrase; statement of meaning, including specifications limits where applicable; cross references to synonyms or related terms; attribution.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

 
2. Referenced Documents

E1703/E1703M-10(2023)

Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

E1778-98a(2019)

Standard Terminology Relating to Pavement Distress (Includes all amendments and changes 12/10/2019).

E1845-23

Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

E1859-97(2001)

Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E1927-98(2023)

Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

F538-22

Standard Terminology Relating to Characteristics and Performance of Tires

D8-22a

Standard Terminology Relating to Materials for Roads and Pavements (Includes all amendments and changes 6/15/2022).

E274-06

Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E556-95(2000)

Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E950-98

Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

E965-15(2019)

Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

E1166-00(2019)

Standard Guide for Network Level Pavement Management

E1215-93(2024)

Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

E1274-18

Standard Test Method for Measuring Pavement Roughness Using a Profilograph

National Institute of Standards and Technology

(NIST) Handbook 44 Available from National Institute of Standards and Technology, 100 Bureau Drive, Stop 3460, Gaithersburg, MD 20899-3460.

SAE J2047

Tire Performance Terminology Available from Society for Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001.

E1170-97(2023)

Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1889-97(2019)

Standard Guide for Pavement Management Implementation

E1926-08(2021)

Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

Special Report 113,

Standard Nomenclature and Definitions for Pavement Components and Deficiencies Available from Transportation Research Board, 500 Fifth Street, NW, Washington, DC, 20001.

E1318-09(2017)

Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods

E1337-19

Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire

E1448-92(1998)

Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E1489-08(2023)

Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E1656-06

Standard Guide for Classification of Automated Pavement Condition Survey Equipment