ASTM F1295-16 - 1.10.2016
 
1. Scope

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold-worked, or hot-worked titanium-6aluminum-7niobium alloy bar, wire, sheet, strip, and plate to be used in the manufacture of surgical implants (1-4).2

1.2 The SI units in this standard are the primary units. The values stated in either primary SI units or secondary inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

 
2. Referenced Documents

E290-22

Standard Test Methods for Bend Testing of Material for Ductility

E1409-13(2021)

Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

E1447-22

Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry

E2371-21a

Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) (Includes all amendments and changes 1/6/2022).

E1941-10(2016)

Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

IEEE/ASTM SI 10

American National Standard for Use of the International System of Units (SI): The Modern Metric System

AMS 2249

Chemical Check Analysis Limits, Titanium and Titanium Alloys

AMS 2631

Ultrasonic Inspection--Titanium and Titanium Alloy Bar and Billet

E8/E8M-24

Standard Test Methods for Tension Testing of Metallic Materials

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

AMS 2630

Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick

E2626-08

Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals