ASTM F1701-96(2001) - 1.1.2001
 
1. Scope

1.1 This specification covers the requirements, sizes, construction, tests, and procedures for unused polypropylene ropes for use by electrical utilities and related industries on energized lines operating at voltages higher than 1 kV.

1.2 This specification covers the minimum electrical, mechanical, and physical properties guaranteed by the manufacturer and the detailed procedures by which such properties are to be determined. The purchaser has the option to perform or have performed any of these tests in order to verify the guarantee. Claims for failure to meet the specification are subject to verification by the manufacturer.

1.3 The rope to which this specification applies is designed to be used in a clean and dry condition, on or near energized lines.

1.4 A margin of safety shall be allowed between the maximum voltage and working distances on which it is used and the test voltage and lengths at which it is tested.

1.5 It is common practice for the user of this type of equipment to prepare complete instructions and regulations to govern in detail the correct and safe use of such equipment.

1.6 The use and maintenance of this equipment is beyond the scope of this specification.

1.7 The values stated in SI units are to be regarded as the standard.

1.8 The following safety hazards caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

D4268-93

Standard Test Methods for Testing Fiber Ropes (Withdrawn 2002)

C1500-08(2017)

Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting

F711-17(2022)

Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

IEEE Std 4

Standard Techniques for High Voltage Testing

Cordage Institute CI-1301

Polypropylene Fiber Rope 3-Strand and 8-Strand Constructions (April 1999)

D1125-23

Standard Test Methods for Electrical Conductivity and Resistivity of Water

E4-21

Standard Practices for Force Calibration and Verification of Testing Machines