ASTM B372-11 - 1.4.2011
 
Significance and Use

For purposes of determining compliance with the specified limits for requirements of chemical composition, hardness, and electrical resistivity, an observed value or a calculated value shall be rounded to the nearest unit in the last right-hand place of the figures of the specified limit in accordance with the rounding method of Practice E29.

 
1. Scope

1.1 This specification establishes the requirements for seamless copper and copper-alloy rectangular tube intended for use as transmission lines in electronic equipment. Five types of material are specified having the following nominal compositions:

 
2. Referenced Documents

E18-25

Standard Test Methods for Rockwell Hardness of Metallic Materials

B846-24

Standard Terminology for Copper and Copper Alloys

B577-24

Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

B428-24

Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

B224-16(2022)

Standard Classification of Coppers

ANSI B46.1

Surface Roughness, Waviness, and Lay Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.

B193-25

Standard Test Method for Resistivity of Electrical Conductor Materials

E255-23

Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E62-89(1996)

Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)

E53-07

Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

B170-24

Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

E478-24

Standard Test Methods for Chemical Analysis of Copper Alloys