For purposes of determining compliance with the specified limits for requirements of chemical composition, hardness, and electrical resistivity, an observed value or a calculated value shall be rounded to the nearest unit in the last right-hand place of the figures of the specified limit in accordance with the rounding method of Practice E29. |
1.1 This specification establishes the requirements for seamless copper and copper-alloy rectangular tube intended for use as transmission lines in electronic equipment. Five types of material are specified having the following nominal compositions: Copper or Copper Alloy UNS No. | Previously Used Designation | Nominal Composition, % | Copper | Zinc | Phos- phorus | | | | | | C10100 | Copper, Type OFEA | 99.99B | ... | ... | C10200 | Copper, Type OFA | 99.95B | ... | ... | C10300 | Copper, Type OFXLPA | 99.95B | ... | 0.003 | C12000 | Copper, Type DLPA | 99.90B | ... | 0.008 | C22000 | Commercial bronze, 90 % | 90 | 10 | ... | ______________ | | | | | A Types OF, OFE, OFXLP, and DLP are described in Classification B224. B Minimum copper percentage. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard. |
E18-25 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
B846-24 | Standard Terminology for Copper and Copper Alloys |
B577-24 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
B428-24 | Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube |
B224-16(2022) | Standard Classification of Coppers |
ANSI B46.1 | Surface Roughness, Waviness, and Lay Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036. |
B193-25 | Standard Test Method for Resistivity of Electrical Conductor Materials |
E255-23 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
E62-89(1996) | Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) |
E53-07 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry |
E29-22 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
B170-24 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
E478-24 | Standard Test Methods for Chemical Analysis of Copper Alloys |
|