ASTM B372-97(2003) - 1.10.2003
 
1. Scope

1.1 This specification covers seamless copper and copper-alloy rectangular tube intended for use as transmission lines in electronic equipment. Four types of material are specified having the following nominal compositions: Types OF and DLP are described in Classification B 224.

Copper or Copper Alloy UNS No. Previously Used DesignationNominal Composition, %
Copper ZincPhos- phorus
C10200Copper, Type OF100......
C10300...99.99...0.003
C12000Copper, Type DLP100......
C22000Commercial bronze, 90 %9010...

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

 
2. Referenced Documents

E18-25

Standard Test Methods for Rockwell Hardness of Metallic Materials

B846-24

Standard Terminology for Copper and Copper Alloys

B577-24

Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

B428-24

Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

B224-16(2022)

Standard Classification of Coppers

ANSI B46.1

Surface Roughness, Waviness, and Lay Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.

B193-25

Standard Test Method for Resistivity of Electrical Conductor Materials

E255-23

Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

E62-89(1996)

Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)

E53-07

Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

B170-24

Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

E478-24

Standard Test Methods for Chemical Analysis of Copper Alloys