ASTM B381-09 - 1.5.2009
 
1. Scope

1.1 This specification covers 39 grades of annealed titanium and titanium alloy forgings as follows:

1.1.1 Grade F-1—Unalloyed titanium,

1.1.2 Grade F-2—Unalloyed titanium,

1.1.2.1 Grade F-2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),

1.1.3 Grade F-3—Unalloyed titanium,

1.1.4 Grade F-4—Unalloyed titanium,

1.1.5 Grade F-5—Titanium alloy (6 % aluminum, 4 % vanadium),

1.1.6 Grade F-6—Titanium alloy (5 % aluminum, 2.5 % tin),

1.1.7 Grade F-7—Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.7.1 Grade F-7H—Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),

1.1.8 Grade F-9—Titanium alloy (3 % aluminum, 2.5 % vanadium),

1.1.9 Grade F-11—Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.10 Grade F-12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.11 Grade F-13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.12 Grade F-14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.13 Grade F-15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.14 Grade F-16—Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.14.1 Grade F-16H—Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),

1.1.15 Grade F-17—Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.16 Grade F-18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 % to 0.08 % palladium,

1.1.17 Grade F-19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),

1.1.18 Grade F-20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 to 0.08 % palladium,

1.1.19 Grade F-21—Titanium alloy (3 % aluminum, 2.7 % niobium, 15 % molybdenum, 0.25 % silicon),

1.1.20 Grade F-23—Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitials, ELI),

1.1.21 Grade F-24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.22 Grade F-25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 to 0.8 % nickel and 0.04 to 0.08 % palladium,

1.1.23 Grade F-26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.23.1 Grade F-26H—Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),

1.1.24 Grade F-27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.25 Grade F-28—Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.08 to 0.14 % ruthenium),

1.1.26 Grade F-29—Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08 to 0.14 % ruthenium),

1.1.27 Grade F-30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.28 Grade F-31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.29 Grade F-32—Titanium alloy (5 % aluminum, 1 % vanadium, 1 % tin, 1 % zirconium, 0.8 % molybdenum),

1.1.30 Grade F-33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.31 Grade F-34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.32 Grade F-35—Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.33 Grade F-36—Titanium alloy (45 % niobium),

1.1.34 Grade F-37—Titanium alloy (1.5 % aluminum), and

1.1.35 Grade F-38—Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).

Note 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use.

The H grades were added in response to a user association request based on its study of over 5200 commercial Grade 2, 7, 16, and 26 test reports, where over 99 % met the 58 ksi minimum UTS.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

 
2. Referenced Documents

E8-04

Standard Test Methods for Tension Testing of Metallic Materials

E2371-21a

Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) (Includes all amendments and changes 1/6/2022).

E1941-10(2024)

Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

E1447-22

Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry

E1409-13(2021)

Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

E539-19(2025)

Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E2626-25

Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

B348-13

Standard Specification for Titanium and Titanium Alloy Bars and Billets