ASTM B392-09 - 1.10.2009
 
Significance and Use

For the purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.

 
1. Scope

1.1 This specification covers four grades of wrought niobium and niobium alloy bar, rod, and wire as follows:

1.1.1 R04200-Type 1—Reactor grade unalloyed niobium,

1.1.2 R04210-Type 2—Commercial grade unalloyed niobium,

1.1.3 R04251-Type 3—Reactor grade niobium alloy containing 1 % zirconium, and

1.1.4 R04261-Type 4—Commercial grade niobium alloy containing 1 % zirconium.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

B391-18(2026)e1

Standard Specification for Niobium and Niobium Alloy Ingots (Includes all amendments and changes 11/9/2026).

E8-04

Standard Test Methods for Tension Testing of Metallic Materials

E2626-25

Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals