ASTM B399/B399M-99 - 10.4.1999
 
1. Scope

1.1 This specification covers concentric-lay-stranded conductors, made from round aluminum-alloy 6201-T81 (hard: solution heat-treated, cold worked, and then artificially aged) wires, for use for electrical purposes. These conductors shall be constructed with a central core surrounded by one or more layers of helically laid wires (Explanatory Notes 1 and 2).

1.2 The SI values of density and resistivity are to be regarded as standard. For all other properties the inch-pound values are to be regarded as standard and the SI units may be approximate.

Note 1-The aluminum alloy and temper designations conform to ANSI H35.1. Aluminum-alloy 6201 corresponds to Unified Numbering System alloyA96201 in accordance with Practice E 527.

 
2. Referenced Documents

B193-25

Standard Test Method for Resistivity of Electrical Conductor Materials

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

B682-01(2024)

Standard Specification for Standard Metric Sizes of Electrical Conductors

B398/B398M-22

Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

B354-23

Standard Terminology Relating to Uninsulated Metallic Electrical Conductors

E527-23

Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

B263-04

Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors