E1139-07 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
E1212-17 | Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
E1254-13(2023) | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
E1312-18 | Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
E1315-93(2002) | Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces (Withdrawn 2007) |
E1316-24 | Standard Terminology for Nondestructive Examinations |
E1359-17 | Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
E1444-05 | Standard Practice for Magnetic Particle Testing |
E1496-05 | Standard Test Method for Neutron Radiographic Dimensional Measurements |
E1816-18(2022) | Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods |
E1888/E1888M-17 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
E1901-23 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
E1930-07 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
E2075-05 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
E2076-05 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
E1419-09 | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
E746-23 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4 MeV |
ASNT Recommended Practice No. SNT-TC-1A | Personnel Qualification and Certification in Nondestructive Testing Available from American Society for Nondestructive Testing (ASNT), P.O. Box 28518, 1711 Arlingate Ln., Columbus, OH 43228-0518, http://www.asnt.org. |
ANSI/ASNT-CP-189 | ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel |
NAS-410 | Certification and Qualification of Nondestructive Personnel (Quality Assurance Committee) Available from Aerospace Industries Association of America, Inc. (AIA), 1000 Wilson Blvd., Suite 1700, Arlington, VA 22209-3928, http://www.aia-aerospace.org. |
E2001-18 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts |
E2096-05 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
E2191-08 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
E2223-13(2022) | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
E2261-07 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
E2375-22 | Standard Practice for Ultrasonic Testing of Wrought Products |
E2479-16(2021) | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves |
E2534-20 | Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
E2700-20 | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
E747-18 | Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology |
E748-19 | Standard Guide for Thermal Neutron Radiography of Materials |
E749-07 | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
E750-15(2020) | Standard Practice for Characterizing Acoustic Emission Instrumentation |
E751-07 | Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
E908-98(2022) | Standard Practice for Calibrating Gaseous Reference Leaks |
E976-15(2021) | Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response |
E999-20 | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
E1001-21 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
E1004-23 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
E1025-18 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
E1030-05 | Standard Test Method for Radiographic Examination of Metallic Castings |
E1032-19 | Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film |
E1033-13 | Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019) |
E1211-07 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
E1417-05 | Standard Practice for Liquid Penetrant Testing |
E1571-21 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
E1606-20 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
E1629-12(2020) | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
E1742-08 | Standard Practice for Radiographic Examination |
E1774-17(2022) | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
E1781-08 | Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
E1932-12(2022) | Standard Guide for Acoustic Emission Examination of Small Parts |
E1961-16(2021) | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
E494-20 | Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method |
E493-06 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
E243-18 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
E317-21 | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
E376-19 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods |
E428-08 | Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing |
E431-96(2022) | Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
E432-91(2022) | Standard Guide for Selection of a Leak Testing Method |
E433-71(2023) | Standard Reference Photographs for Liquid Penetrant Inspection |
E479-91(2000) | Standard Guide for Preparation of a Leak Testing Specification |
E2192-13(2022) | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
E2338-22 | Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
E2373-09 | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
E2374-16(2021) | Standard Guide for Acoustic Emission System Performance Verification |
E2491-23 | Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems |
E2580-24 | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
E566-19 | Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals |
E570-20 | Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
E571-19 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
E309-16 | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
E426-16(2021) | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
E427-95(2000) | Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
E114-20 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
E125-63(2023) | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
E127-20 | Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks |
E164-19 | Standard Practice for Contact Ultrasonic Testing of Weldments |
E165-09 | Standard Practice for Liquid Penetrant Examination for General Industry |
E213-22 | Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
E664-93(2000) | Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
E690-15(2020) | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
E703-20 | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
E709-21 | Standard Guide for Magnetic Particle Testing |
E650-97 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
E498-95(2000) | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
E215-22 | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
E273-20 | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
E94-04 | Standard Guide for Radiographic Examination |
E1962-19 | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
E499-95(2000) | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
E515-11(2022) | Standard Practice for Leaks Using Bubble Emission Techniques |
E545-19 | Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
E569-07 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
E587-15(2020) | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
E592-20 | Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates 14 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60 |
E797-05 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
E801-21 | Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices |
E803-20 | Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams |
E1067-07 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
E1118-05 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |