ASTM F987-04(2010) - 1.5.2010
 
1. Scope

1.1 This specification covers the design, construction, and installation of intermediate portable flush deck stanchions. Intermediate stanchion is defined as any stanchion that is not an end or corner stanchion.

1.2 Stanchions shall be used on interior and exterior decks, to provide temporary protection to minimize the danger of personnel falling overboard or to a lower level in the ship in areas where the installation of a fixed system would interfere with vessel operations.

1.3 Stanchions may be used with 3/8-in. (9.5-mm) galvanized close link chain or wire rope lifelines 9/16-in. (14-mm) top course, 7/16-in. (11-mm) lower courses.

1.4 This specification covers only the stanchions and does not cover requirements for the chain or wire rope lines to be supported by the stanchion.

1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

 
2. Referenced Documents

ANSI/AWS D 1.1

Structure Welding Code

ANSI B 16.15

Cast Bronze Threaded Fittings

A106/A106M-19a

Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service (Includes all amendments and changes 11/21/2019).

A123/A123M-17

Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

Title 46

Shipping, Parts 70 to 89, Subpart 72.40 Available from U.S. Government Printing Office Superintendent of Documents, 732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401.

A182/A182M-24

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

F783-88(2023)

Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung