ASTM G190-15 - 1.5.2015
 
Significance and Use

5.1 The guidance and methodology provided by this guide is applicable for any wear situation and is not limited to material or lubrication. This guide is intended to provide general information and guidance regarding the selection and development of a wear test and does not provide specifics about any one wear test or intended application. In general the variability and correlation that is obtained with any wear test is determined by the degree to which the various elements of the wear test methodology described in this guide are followed.

 
1. Scope

1.1 This guide covers general information for the development and selection of a wear test for an intended application.

 
2. Referenced Documents

D2714-94(2019)

Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

G119-09(2021)

Standard Guide for Determining Synergism Between Wear and Corrosion

G118-02

Standard Guide for Recommended Format of Wear Test Data Suitable for Databases

G99-23

Standard Test Method for Wear and Friction Testing with a Pin-on-Disk or Ball-on-Disk Apparatus

G117-13

Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016)

G105-20

Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G81-97a(2018)

Standard Test Method for Jaw Crusher Gouging Abrasion Test (Includes all amendments and changes 12/17/2018).

G77-17(2022)

Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

G76-18

Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

G133-22

Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear

G134-17(2023)

Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet

G137-97(2017)

Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

G163-10

Standard Guide for Digital Data Acquisition in Wear and Friction Measurements (Withdrawn 2016)

G171-03(2017)

Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus

G174-22

Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

G176-03(2017)

Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test´Cumulative Wear Method

G181-21

Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

D3704-96(2017)

Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

D2266-23

Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

D2670-20

Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

G132-96(2018)

Standard Test Method for Pin Abrasion Testing

D3702-94(2019)

Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

G98-23

Standard Test Method for Galling Resistance of Materials

G56-18

Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials (Withdrawn 2022)

G65-16(2021)

Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

G73-10(2021)

Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus

G75-15(2021)

Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)

D4170-16

Standard Test Method for Fretting Wear Protection by Lubricating Greases

D4172-21

Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

F732-17

Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

G32-16(2021)e1

Standard Test Method for Cavitation Erosion Using Vibratory Apparatus (Includes all amendments and changes 6/23/2021).

G40-22a

Standard Terminology Relating to Wear and Erosion (Includes all amendments and changes 11/11/2022).

G83-96

Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005)