ASTM B609/B609M-99(2010) - 1.10.2010
 
1. Scope

1.1 This specification covers aluminum 1350-O (annealed), 1350-H12 or -H22 (¼ hard), 1350-H14 or -H24 (½ hard), 1350-H16 or -H26 (¾ hard) and 1350-H142 or -H242 (½ hard), suitable for stranding into conductors or for solid single conductors, either bare or insulated (see Table 1 or Table 2).

1.2 The values stated in inch-pound units or SI units are to be regarded separately as standard. The values in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

 
2. Referenced Documents

B354-23

Standard Terminology Relating to Uninsulated Metallic Electrical Conductors

B193-25

Standard Test Method for Resistivity of Electrical Conductor Materials

B233-97(2021)

Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

ANSI H35.1

American National Standard for Alloy and Temper Designation Systems for Aluminum

B557-15(2023)

Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

B682-01(2024)

Standard Specification for Standard Metric Sizes of Electrical Conductors

B830-18(2026)

Standard Specification for Uniform Test Methods and Frequency

ANSI H35.1[M]

American National Standard for Alloy and Temper Designation Systems for Aluminum

E527-23

Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

E29-22

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications