ASTM C1014-03 - 1.10.2003
 
1. Scope

1.1 This specification covers the composition and the physical properties of spray-applied mineral fiber thermal and sound absorbing insulation.

1.2 These mineral fibers shall be pneumatically conveyed to a spray nozzle where they are mixed with water. These mineral fibers shall have a binder either pre-mixed with the fibers or added at the spray nozzle with the water.

1.3 The spray-applied mineral fiber insulation is intended for use in building constructions at ambient conditions.

1.4 This is a material specification only and is not intended to cover methods of application that are supplied by the manufacturer.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

C1304-23

Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

C168-25

Standard Terminology Relating to Thermal Insulation

C177-19e1

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).

C390-08(2024)

Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

C423-23e1

Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method (Includes all amendments and changes 8/9/2024).

C518-21

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C665-24

Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

C1104/C1104M-19(2025)

Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

C1338-25

Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

E859-93(2000)

Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

E605-93(2000)

Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E756-05(2023)

Standard Test Method for Measuring Vibration-Damping Properties of Materials

E759-92(2000)

Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

E795-23

Standard Practices for Mounting Test Specimens During Sound Absorption Tests

C1368-18(2026)

Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature

E84-26a

Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).

C1114-06(2019)

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

C1149-23

Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation