ASTM C1071-00 - 10.12.2000
 
1. Scope

1.1 This specification covers fibrous glass insulation used as a thermal and sound absorbing liner for interior surfaces of ducts, plenums, and other air handling equipment that handle air up to 250oF (121oC).

1.2 The values stated in inch-pound units are the standard. The SI values in parentheses are for information only.

1.3

 
2. Referenced Documents

C177-19e1

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Includes all amendments and changes 2/23/2023).

C1338-25

Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

C167-25

Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

G22-23

Standard Practice for Determining Resistance of Plastics to Bacteria

G21-15(2021)e1

Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi (Includes all amendments and changes 6/22/2021).

E2231-26a

Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics (Includes all amendments and changes 8/26/2026).

E795-23

Standard Practices for Mounting Test Specimens During Sound Absorption Tests

E84-26a

Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).

C1617-24

Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel

C390-08(2024)

Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

C411-19

Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

C423-23e1

Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method (Includes all amendments and changes 8/9/2024).

C518-21

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C665-24

Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

C1104/C1104M-19(2025)

Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

C1114-06(2019)

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

C1304-23

Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

C168-25

Standard Terminology Relating to Thermal Insulation