ASTM C1175-99a - 10.5.1999
 
1. Scope

1.1 This guide identifies and describes standard procedures and methods for nondestructive testing of advanced ceramics using radiology, ultrasonics, and liquid penetrants.

1.2 This guide is to identify existing standards for nondestructive testing that have been determined to be (or have been modified to be) applicable to the examination of advanced ceramics. These standards have been generated by, and are under the jurisdiction of, ASTM Committee E-7 on Nondestructive Testing. Selection and application of these standards to be followed must be governed by experience and the specific requirements in each individual case, together with agreement between producer and user.

1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

E750-15(2025)

Standard Practice for Characterizing Acoustic Emission Instrumentation

E797-05

Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

E976-15(2026)

Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

E999-20(2025)

Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

E1000-24

Standard Guide for Radioscopy

E1065-08

Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

E1079-21

Standard Practice for Calibration of Transmission Densitometers

E1106-12(2021)

Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E1165-20

Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

E1672-12(2020)

Standard Guide for Computed Tomography (CT) System Selection

E1695-20e1

Standard Test Method for Measurement of Computed Tomography (CT) System Performance (Includes all amendments and changes 6/20/2022).

E1219-21

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

E1220-21

Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

E1255-23

Standard Practice for Radioscopy

E1316-26c

Standard Terminology for Nondestructive Examinations (Includes all amendments and changes 9/22/2026).

E1324-21(2026)

Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

E1390-21

Standard Specification for Illuminators Used for Viewing Industrial Radiographs

E1411-23

Standard Practice for Qualification of Radioscopic Systems

E1441-19(2026)

Standard Guide for Computed Tomography (CT)

E1453-20

Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

E1570-19(2026)

Standard Practice for Fan Beam Computed Tomographic (CT) Examination

E1647-16(2022)

Standard Practice for Determining Contrast Sensitivity in Radiology

E1781-08

Standard Practice for Secondary Calibration of Acoustic Emission Sensors

E1817-26

Standard Practice for Controlling Quality of Radiographic Examination by Using Representative Quality Indicators (RQIs)

E1254-13(2023)

Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

E1210-21

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

E664-93(2000)

Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

E1209-18(2026)

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E1208-21

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

E114-20

Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

E165-09

Standard Practice for Liquid Penetrant Examination for General Industry

E317-21

Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

E650-97

Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E587-15(2025)

Standard Practice for Ultrasonic Angle-Beam Contact Testing

E569-07

Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

E494-20(2025)

Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method

E94-04

Standard Guide for Radiographic Examination