ASTM C118M-99 - 10.8.1999
 
1. Scope

1.1 This specification covers nonreinforced concrete pipe to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1 and for use in drainage.

1.2 This specification is the SI counterpart of Specification C118.

Note-This specification is for manufacturing and purchase only and does not include requirements for bedding, backfill, installation, or field repairs. The owner is cautioned that he must correlate field conditions with the characteristics of the pipe specified and provide inspection during installation.
 
2. Referenced Documents

C260/C260M-24

Standard Specification for Air-Entraining Admixtures for Concrete

C494/C494M-24

Standard Specification for Chemical Admixtures for Concrete

C33/C33M-24a

Standard Specification for Concrete Aggregates (Includes all amendments and changes 11/18/2024).

C1602/C1602M-22

Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1017-C1017M-13

Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

C1116/C1116M-23

Standard Specification for Fiber-Reinforced Concrete

C497M-20

Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)

C595/C595M-26

Standard Specification for Blended Hydraulic Cements

C618-26

Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C822-21

Standard Terminology Relating to Concrete Pipe and Related Products

C989/C989M-26

Standard Specification for Slag Cement for Use in Concrete and Mortars

C150/C150M-24

Standard Specification for Portland Cement