ASTM C1233-98 - 10.8.1998
 
1. Scope

1.1 This standard details a recommended practice for the calculation of the Equivalent Boron Content (EBC) values for elements that are of potential significance as thermal neutron poisons. The values are determined from a knowledge of the atomic weight of elements and the thermal neutron absorption cross section in barns. This practice is illustrated by using the EBC factors of Table 1 which are based on thermal neutron (2200 m/s) absorption cross sections. Other EBC factors may be used depending upon the actual neutron energy characteristics of the applicable reactor system.

1.2 The following elements do not require to be included in the EBC calculations, as their EBC factors are less than or equal to 0.0001: aluminum; fluorine; rubidium; barium; lead; silicon; beryllium; neon; tin; bismuth; oxygen; zirconium; carbon; magnesium; cerium; phosphorus. Their contribution to the total poison effect is not considered significant.

 
2. Referenced Documents

C698-24

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)

C761-24

Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride

C799-19

Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions

C696-19

Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets

C859-26

Standard Terminology Relating to Nuclear Materials