4.1 Specific gamma-ray emitting radionuclides in UF₆ are identified and quantified using a high-resolution gamma-ray energy analysis system, which includes a high-resolution germanium detector. This test method shall be used to meet the health and safety specifications of C787, C788, and C996 regarding applicable fission products in reprocessed uranium solutions. This test method may also be used to provide information to parties such as conversion facilities on the level of uranium decay products in such materials.

1.1 This test method covers the measurement of gamma energy emitted from fission and decay products in uranium hexafluoride (UF₆) and uranyl nitrate solution. It is intended to provide a method for demonstrating compliance with UF₆ specifications C787 and C996 and uranyl nitrate specification C788.

1.2 The lower limit of detection is 5000 MeV Bq/kg (MeV/kg per second) of uranium and is the square root of the sum of the squares of the individual reporting limits of the nuclides to be measured. The limit of detection was determined on a pure, aged natural uranium (ANU) solution. The value is dependent upon detector efficiency and background.

1.3 The nuclides to be measured are ¹⁰⁶Ru/ ¹⁰⁶Rh, ¹⁰³Ru, ¹³⁷Cs, ¹⁴⁴Ce, ¹⁴⁴Pr, ¹⁴¹Ce, ⁹⁵Zr, ⁹⁵Nb, and ¹²⁵Sb. Other gamma energy-emitting fission nuclides present in the spectrum at detectable levels should be identified and quantified as required by the data quality objectives.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.