ASTM C1295-98 - 10.7.1998
 
1. Scope

1.1 This test method covers the measurement of gamma energy emitted from fission products in uranium hexafluoride (UF ). It is intended to provide a method for demonstrating compliance with UF Specifications C787 and C996 and replace the ion chamber measurement technique.

1.2 The lower limit of detection is 5000 MeV Bq/kg (MeV/kg per second) of uranium and is the square root of the sum of the squares of the individual reporting limits of the nuclides to be measured. The limit of detection was determined on a pure, aged natural uranium (ANU) solution. The value is dependent upon detector efficiency and background.

1.3 The nuclides to be measured are 106 Ru/ 106 Rh, 103 Ru, 144 Ce, 144 Pr, 141 Ce, 95 Zr, 95 Nb, 125 Sb. Other gamma energy-emitting fission nuclides that are identified should be measured and reported.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

C761-24

Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride

C996-20(2025)

Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U

C1022-17(2022)

Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate

D3649-23

Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water

E181-23

Standard Guide for Detector Calibration and Analysis of Radionuclides in Radiation Metrology for Reactor Dosimetry

C787-20(2025)

Standard Specification for Uranium Hexafluoride for Enrichment

C788-03(2021)

Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals

C859-26

Standard Terminology Relating to Nuclear Materials

C967-25

Standard Specification for Uranium Ore Concentrate