C1045-19(2026) | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
IEEE/ASTM SI?10 | Standard for Use of the International System of Units (SI) (The Modern Metric System) |
E473-25a | Standard Terminology Relating to Thermal Analysis and Rheology (Includes all amendments and changes 9/11/2025). |
E1142-25a | Standard Terminology Relating to Thermophysical Properties (Includes all amendments and changes 9/11/2025). |
E122-17(2022) | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
C372-94(2024) | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method |
C351-92b(1999) | Standard Test Method for Mean Specific Heat of Thermal Insulation |
E289-25 | Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry |
E831-25 | Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
C714-23 | Standard Guide for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method |
E1461-13(2022) | Standard Test Method for Thermal Diffusivity by the Flash Method |
E408-13(2025) | Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
E423-71(2025) | Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens |
C373-18(2023) | Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products |
C1145-19(2025)e1 | Standard Terminology of Advanced Ceramics (Includes all amendments and changes 2/20/2025). |
C1300-95(2025) | Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method |
E228-22 | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
D2766-95(2000) | Standard Test Method for Specific Heat of Liquids and Solids |
E1269-24 | Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
C177-19(2026) | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
C182-24 | Standard Test Method for Thermal Conductivity of Insulating Firebrick |
C201-24 | Standard Test Method for Thermal Conductivity of Refractories |
C202-19(2024)e1 | Standard Test Method for Thermal Conductivity of Refractory Brick (Includes all amendments and changes 8/21/2024). |
C408-88(2025) | Standard Test Method for Thermal Conductivity of Whiteware Ceramics |
C518-21 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
C767-24 | Standard Test Method for Thermal Conductivity of Carbon Refractories |
C1044-24 | Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode |
C1045-19(2026) | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
C1113-99 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
C1114-06(2019) | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
C1130-24 | Standard Practice for Calibration of Thin Heat Flux Transducers |
E1225-25a | Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique (Includes all amendments and changes 9/19/2025). |
E1530-25 | Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique |