ASTM C1481-00 - 10.9.2000
 
1. Scope

1.1 This guide describes the use of single and multi-component, cold-applied joint sealants, or precured sealant systems for joint sealing applications, or both, in buildings using exterior insulation and finish systems (EIFS) on one or both sides of the joint. Refer to 10.1 for joint seal geometries.

1.2 The elastomeric sealants described by this guide meet the requirements of Specifications C834, C920, or C1311.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Notes 1 and 2.

1.4 There are no ISO standards similar or equivalent to this ASTM standard.

 
2. Referenced Documents

E2568-17a(2026)

Standard Specification for PB Exterior Insulation and Finish Systems (Includes all amendments and changes 1/28/2026).

E2511-17(2023)

Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies

E2110-25

Standard Terminology for Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

C1472-16(2022)

Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

C1397-25

Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage

C1382-16(2023)

Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

C1311-22

Standard Specification for Solvent Release Sealants

C1193-25

Standard Guide for Use of Joint Sealants

C920-18(2024)

Standard Specification for Elastomeric Joint Sealants

C834-26

Standard Specification for Latex Sealants

C794-18(2022)

Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

American National Standard

for Exterior Insulation and Finish Systems (EIFS) Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036.

C717-26

Standard Terminology of Building Seals and Sealants

C719-22

Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)