ASTM C1582/C1582M-04 - 1.8.2004
 
1. Scope

1.1 This specification covers material for use as chloride-corrosion-inhibiting admixtures for concrete.

1.2 Results of the tests conducted to meet this specification are not to be used to rank the expected field performance of various chloride-corrosion-inhibiting admixtures.

1.3 The values stated in either inch-pound or SI units shall be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other without combining values in any way.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. (Warning-Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.)

 
2. Referenced Documents

C231-09

Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C260-10

Standard Specification for Air-Entraining Admixtures for Concrete

G180-23

Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

ACI 211.1

Practice for Selecting Proportions of Normal, Heavyweight, and Mass Concrete Available from the American Concrete Institute, P.O. Box 9094, Farmington Hills, MI 48333-9094.

C39/C39M-26

Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C78-09

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C125-26

Standard Terminology Relating to Concrete and Concrete Aggregates

C143/C143M-26b

Standard Test Method for Slump of Concrete (Includes all amendments and changes 8/6/2026).

C150-07

Standard Specification for Portland Cement

C157/C157M-24e1

Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete (Includes all amendments and changes 10/14/2024).

C403/C403M-23

Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C494/C494M-24

Standard Specification for Chemical Admixtures for Concrete

C666/C666M-26

Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

C1152/C1152M-20

Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

G15-08

Standard Terminology Relating to Corrosion and Corrosion Testing (Withdrawn 2010)

G109-23

Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments