C150/C150M-24 | Standard Specification for Portland Cement |
A36/A36M-19 | Standard Specification for Carbon Structural Steel |
C309-25 | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
C497M-20 | Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric) |
C595/C595M-26 | Standard Specification for Blended Hydraulic Cements |
C618-26 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| 1012 Available from American Iron and Steel Institute (AISI), 1140 Connecticut Ave., NW, Suite 705, Washington, DC 20036, http://www.steel.org. |
ASCE 15-93 | |
ACI Code 318 | Standard Building Code Requirements for Reinforced Concrete Available from American Concrete Institute (ACI), P.O. Box 9094, Farmington Hills, MI 48333-9094, http://www.concrete.org. |
C655-19a(2025) | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Includes all amendments and changes 9/29/2025). |
C822-21 | Standard Terminology Relating to Concrete Pipe and Related Products |
C1602/C1602M-22 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
C1619-23 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
D698-12(2021) | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)) |
D4253-16 | Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table |
D4254-16 | Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density (Withdrawn 2025) |
A1011/A1011M-25 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High-Strength |
A1064/A1064M-24 | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
C31/C31M-26b | Standard Practice for Making and Curing Concrete Test Specimens in the Field (Includes all amendments and changes 8/27/2026). |
C33/C33M-24a | Standard Specification for Concrete Aggregates (Includes all amendments and changes 11/18/2024). |
C39/C39M-26 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
A1008/A1008M-26 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
A675/A675M-14(2025) | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
A706/A706M-26a | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement (Includes all amendments and changes 10/6/2026). |
A27/A27M-26 | Standard Specification for Steel Castings, Carbon, for General Application |
A283/A283M-24 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
A575-26 | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades |
A576-25 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
A615/A615M-26 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
C260/C260M-24 | Standard Specification for Air-Entraining Admixtures for Concrete |