ASTM C465-99(2005) - 1.7.2005
 
1. Scope

1.1 This specification pertains to the criteria and tests to be used for determining whether a processing addition, when used in the recommended amount at the option of the cement producer in the manufacture of hydraulic cements, meets the requirements as prescribed by definition in Specifications C 150, C 1157, C 845, and C 595. The materials listed in the following former ASTM Specifications shall be considered as meeting the requirements of this specification:
C 150 - 62, for Portland Cement
C 205 - 58 T, for Portland Blast-Furnace Slag Cement
C 340 - 58 T, for Portland Pozzolan Cement
C 358 - 58, for Slag Cement

1.2 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

C596-23

Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

D891-25

Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals

E203-24

Standard Test Method for Water Using Volumetric Karl Fischer Titration

C845-04

Standard Specification for Expansive Hydraulic Cement

C1157-08

Standard Performance Specification for Hydraulic Cement

C192/C192M-26b

Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory (Includes all amendments and changes 10/13/2026).

C205-67

Specification for Portland Blast-Furnace Cement (Withdrawn 1967)

C226-22

Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C231-09

Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C293-08

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

C340-67

Specification for Portland-Pozzolan Cement (Withdrawn 1967)

C204-26

Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

C358-66

Specification for Slag Cement (Withdrawn 1967)

C595-08

Standard Specification for Blended Hydraulic Cements

C617-10

Standard Practice for Capping Cylindrical Concrete Specimens

C191-26

Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

C39/C39M-26

Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C78-09

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C109/C109M-26a

Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens) (Includes all amendments and changes 7/30/2026).

C114-24

Standard Test Methods for Chemical Analysis of Hydraulic Cement

C115-10

Standard Test Method for Fineness of Portland Cement by the Turbidimeter

C138/C138M-24a

Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete (Includes all amendments and changes 8/6/2024).

C33-07

Standard Specification for Concrete Aggregates

C143/C143M-26b

Standard Test Method for Slump of Concrete (Includes all amendments and changes 8/6/2026).

C150-07

Standard Specification for Portland Cement

C151-05

Standard Test Method for Autoclave Expansion of Hydraulic Cement

C173/C173M-26

Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

C185-20

Standard Test Method for Air Content of Hydraulic Cement Mortar

C187-25

Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste