ASTM C533-85(1990) - 1.1.1900
 
2. Referenced Documents

E84-26a

Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026).

E136-26

Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C

C1617-24

Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel

C177-19(2026)

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

C165-23

Standard Test Method for Measuring Compressive Properties of Thermal Insulations

C168-25

Standard Terminology Relating to Thermal Insulation

C302-13(2022)

Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

C303-21

Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation

C335-05a

Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

C356-22

Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

C390-08(2024)

Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

C411-26

Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

C421-26

Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

C446-88(1993)e1

Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes (Withdrawn 2002)

C518-21

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C585-22

Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

C795-08(2023)

Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

C870-24

Standard Practice for Conditioning of Thermal Insulating Materials

C1045-19(2026)

Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

C1058-03

Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

C1114-06(2019)

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

C203-22

Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

C1616-25

Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight