ASTM C551-07 - 1.11.2007
 
1. Scope

1.1 This specification covers asbestos-cement insulating panels consisting of a core of insulating fiber board sandwiched between, and bonded to, two sheets of asbestos-cement facing board. Asbestos-cement insulating panels are designed for exterior and interior walls, partitions, curtain walls, roof decks, and for decorative purposes.

1.2 All measurements and tests necessary for determining the conformity of asbestos-cement insulating panels with this specification are made in accordance with the methods covered in Section 9 .

1.3 The values stated in SI units are to be regarded as the standard. The values stated in parentheses are provided for information only.

1.4 Warning-Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to "Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures."

1.5 The following safety hazards caveat pertains only to the test method portion, Section 9, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.See 1.4 for a specific hazard warning.

 
2. Referenced Documents

C208-22

Standard Specification for Cellulosic Fiber Insulating Board

C150-07

Standard Specification for Portland Cement

National Motor Freight Classification Rules

MIL-STD-129

Marking for Shipment and Storage

Fed. Std. No. 123

Marking for Shipment (Civil Agencies)

E96/E96M-24a

Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials (Includes all amendments and changes 11/20/2024).

C518-21

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C595-08

Standard Specification for Blended Hydraulic Cements

C618-26

Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C220-91(1999)

Standard Specification for Flat Asbestos-Cement Sheets

D2946-01

Standard Terminology for Asbestos and Asbestos-Cement Products

C458-98

Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

C236-89(1993)e1

Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box (Withdrawn 2001)