D312/D312M-16a(2023) | Standard Specification for Asphalt Used in Roofing (Includes all amendments and changes 3/6/2023). |
E84-26a | Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026). |
E96/E96M-24a | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials (Includes all amendments and changes 11/20/2024). |
ISO 3951 | |
ISO 8497 | Determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
C1058/C1058M-10(2023) | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
C1114-06(2019) | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
C1617-24 | Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel |
C1639-19(2025) | Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation |
C871-18(2023) | Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions |
D226/D226M-25 | Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
C585-22 | Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
C692-13(2023) | Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel |
C795-08(2023) | Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel |
C518-21 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
C165-23 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
C168-25 | Standard Terminology Relating to Thermal Insulation |
C177-19(2026) | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
C203-22 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
C240-21 | Standard Test Methods for Testing Cellular Glass Insulation Block |
C302-13(2022) | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
C303-21 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
C335/C335M-23 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
C390-08(2024) | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
C411-26 | Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation |
C450-18(2026) | Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging |
C1045-19(2026) | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |