C390-08(2024) | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
E84-26a | Standard Test Method for Surface Burning Characteristics of Building Materials (Includes all amendments and changes 4/15/2026). |
D6226-21 | Standard Test Method for Open Cell Content of Rigid Cellular Plastics |
D2856-94(1998) | Standard Test Method for Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer (withdrawn 2006) |
D2126-25 | Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
D1622-D1622M-14 | Standard Test Method for Apparent Density of Rigid Cellular Plastics |
D1621-16(2023) | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
C1058/C1058M-10(2023) | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
C1363-24 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
C1303/C1303M-23 | Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation |
C1114-06(2019) | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
D883-26b | Standard Terminology Relating to Plastics (Includes all amendments and changes 8/24/2026). |
E96/E96M-24a | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials (Includes all amendments and changes 11/20/2024). |
C168-25 | Standard Terminology Relating to Thermal Insulation |
C165-23 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
C177-19(2026) | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
C1045-19(2026) | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
C871-18(2023) | Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions |
C585-22 | Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
C550-26 | Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation |
C518-21 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
C411-26 | Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation |
C335/C335M-23 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
C303-21 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
C272/C272M-18(2024) | Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions |