ASTM C655M-11 - 1.2.2011
 
1. Scope

1.1 This specification covers reinforced concrete pipe designed for specific D-loads and intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construction of culverts.

1.2 This specification is the metric counterpart of Specification C655.

Note 1—Experience has shown that the successful performance of this product depends upon the proper selection of the pipe strength, the type of bedding and backfill, the care that the installation conforms to the construction specifications, and provision for adequate inspection at the construction site. This specification does not include requirements for bedding, backfill, the relationship between field load conditions and the strength designation of pipe, or durability under unusual environmental conditions. These requirements should be included in the project specification.

 
2. Referenced Documents

C989/C989M-26

Standard Specification for Slag Cement for Use in Concrete and Mortars

C990M-09

Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

C1017-C1017M-13

Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

A615/A615M-26

Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

A706/A706M-26a

Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement (Includes all amendments and changes 10/6/2026).

A1064/A1064M-24

Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

C33/C33M-24a

Standard Specification for Concrete Aggregates (Includes all amendments and changes 11/18/2024).

C150/C150M-24

Standard Specification for Portland Cement

C260/C260M-24

Standard Specification for Air-Entraining Admixtures for Concrete

C443M-21

Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

C494/C494M-24

Standard Specification for Chemical Admixtures for Concrete

C497M-20

Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)

A36/A36M-19

Standard Specification for Carbon Structural Steel

C595/C595M-26

Standard Specification for Blended Hydraulic Cements

C1602/C1602M-22

Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

C1628-19(2024)

Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets

E105-21

Standard Guide for Probability Sampling of Materials

C1116/C1116M-23

Standard Specification for Fiber-Reinforced Concrete

C618-26

Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

C822-21

Standard Terminology Relating to Concrete Pipe and Related Products