ASTM C672/C672M-03 - 1.12.2003
 
Significance and Use

This test method can be used to evaluate the effect of mixture proportioning, surface treatment, curing, or other variables on resistance to scaling.

This test method is not intended to be used in determining the durability of aggregates or other ingredients of the concrete.

No relationship has been established between the frost immunity of specimens cut from hardened concrete and specimens prepared in the laboratory.

 
1. Scope

1.1 This test method covers the determination of the resistance to scaling of a horizontal concrete surface exposed to freezing-and-thawing cycles in the presence of deicing chemicals. It is intended for use in evaluating this surface resistance qualitatively by visual examination.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 
2. Referenced Documents

C192/C192M-26b

Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory (Includes all amendments and changes 10/13/2026).

C231-09

Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C233-10

Standard Test Method for Air-Entraining Admixtures for Concrete

C143/C143M-26b

Standard Test Method for Slump of Concrete (Includes all amendments and changes 8/6/2026).

C511-21

Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C156-25

Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

C173/C173M-26

Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method